China Netel logoChina Netel
AVAYA END-OF-SALE MODEL

Avaya 8403B digital telephone

8403B (Entry-level digital telephone of the 8400 Series) is end-of-sale. We still handle spare parts, repair, maintenance contracts and replacement for it, checked against the model and part number.

Model
8403B
Part number
—
Series
IP Phones · 6400 / 8400 Digital Sets
Product status
End-of-Sale (discontinued)

Model and part number

8403B (Entry-level digital telephone of the 8400 Series) belongs to IP Phones · 6400 / 8400 Digital Sets and is a discrete orderable item within the Avaya portfolio. No part number is recorded for this model in our current data; we can trace it from the model name.

The same model can carry more than one part number (P/N), depending on year of manufacture, configuration or regional packaging. Please quote the part number when asking about spares or pricing; if you only have the model name, we can look the part number up for you.

ModelPart numberSeriesProduct status
8403B—IP Phones · 6400 / 8400 Digital SetsEnd-of-Sale (discontinued)

Where these systems stand today

The 8400 Series is a four-wire digital telephone from the Definity era; the 6400 Series was its two-wire successor. What remains in China sits on systems whose cabinets are still running: the sets themselves have not failed, but the parts around them have — handset cords, keys, stands and local power supplies.

Both generations connect through a digital station board, but the wiring differs: the 8400 is four-wire and needs a four-wire DCP board, while the 6400 is two-wire and uses boards such as the TN2181 or TN2224. The board usually becomes the bottleneck before the phone does: once the board is out of supply, a whole run of stations loses its fallback.

Replacement and migration advice

Avaya's migration path at the time was to move from the 8400 down to the 6400 and 2400 — and both of those families are now end-of-sale as well, so the replacement advice in the notice runs out here. Neither the 8400 nor the 6400 has a "next generation" named in those notices that you can still order. That leaves two routes: source identical spares and repairable units against the part number to keep the current system alive, or re-equip with in-production phones after confirming whether the existing digital station boards can still be used. Both start with a site survey, not with an order based on the notice.

SUPPORT

Four things we still handle after end-of-sale

End-of-sale does not mean the end of support. These are the four things we actually do for discontinued models, and the four questions customers ask most often.

Spare parts

We check original and refurbished stock against the part number, starting with consumables such as power supplies, handset cords, fans and boards.

Ask about parts

Repair and RMA

Board-level and unit-level repair, with fault isolation before any quote. If a unit is beyond economic repair, we say so.

Repair service

Maintenance contracts

In-service systems can be covered by a maintenance contract with remote support, on-site dispatch and spare parts cover, scoped by response level.

Maintenance plans

Replacement and migration

Replacement paths are based on interface type, port count and software release. Where a smooth transition is possible, we do not propose a rip-and-replace.

Current models
FAQ

Common questions about this model

Q: Can I still buy the 8403B? A: New units are no longer supplied. Spare parts, refurbished units and functionally compatible substitutes may still be available; we check stock against the part number and give you a definite answer. Note also that most replacement models named in an end-of-sale notice have themselves been discontinued, so confirm the current position with us before changing model.

Q: Can 8400 and 6400 sets be swapped directly? A: No. The 8400 is a four-wire interface and the 6400 a two-wire one, so they sit on different types of digital station board. Any change of model has to include a check of the board type, and sometimes a board change as well.,Q: Can 8400 and 6400 sets be swapped directly? A: No. The 8400 is a four-wire interface and the 6400 a two-wire one, so they sit on different types of digital station board. Any change of model has to include a check of the board type, and sometimes a board change as well.

Q: How do I find out whether spare parts still exist for my model? A: Send us the model name or part number (phone 400-678-9559, email gq.han@china-netel.com). We check stock and cross-reference alternatives first, then come back with a plan and a quote.

The model is end-of-sale, the problem is still ours to solve

Tell us the model, the part number and what the system is doing. We will tell you whether parts, repair or migration makes more sense before we talk price.

Contact Us
Call Us