China Netel logoChina Netel
AVAYA END-OF-SALE MODEL

Avaya E159 conference phone

E159 (Media station conference kit) is end-of-sale. We still handle spare parts, repair, maintenance contracts and replacement for it, checked against the model and part number.

Model
E159
Part number
700508084
Series
Conference phones
Product status
End-of-Sale (discontinued)

Model and part number

E159 (Media station conference kit) belongs to Conference Phones and is a discrete orderable item within the Avaya portfolio. The sections below cover its current status, the support routes still available, and what else in the same series is worth knowing.

The part number for this model in the Avaya catalogue is 700508084. Purchasing, repair and maintenance are all quoted against this number.

The same model can carry more than one part number (P/N), depending on year of manufacture, configuration or regional packaging. Please quote the part number when asking about spares or pricing; if you only have the model name, we can look the part number up for you.

ModelPart numberSeriesProduct status
E159700508084Conference phonesEnd-of-Sale (discontinued)

Where these systems stand today

These conference phones span three generations. The 4690IP and 1692 are early Avaya room models, with the 1692 PoE-powered and simple to deploy. The B100 family — B179, B169 and B149 — came from the Konftel acquisition and covers SIP, wireless DECT and analog access respectively. The E159 is a media-station style conference kit.

Whether a conference phone stays usable comes down to two things: microphone coverage and power. The B179 is PoE only, so a room without PoE needs an injector; the B169 runs DECT and pairs with a base station, so losing the base takes the whole unit out. These accessories went out of supply earlier than the main units and are the most common point of failure in practice.

Replacement and migration advice

The range of conference phones Avaya still ships is narrow, and most of the replacement models named in the notices have themselves been withdrawn, so they are no longer something you can simply order. The choice should be re-made against room size, pickup radius and access type (SIP, analog or USB), and where appropriate a third-party conference phone can be paired with the voice platform we supply. Tell us the room size and the platform in place; that is a better basis than ordering the replacement named in an old notice.

SUPPORT

Four things we still handle after end-of-sale

End-of-sale does not mean the end of support. These are the four things we actually do for discontinued models, and the four questions customers ask most often.

Spare parts

We check original and refurbished stock against the part number, starting with consumables such as power supplies, handset cords, fans and boards.

Ask about parts

Repair and RMA

Board-level and unit-level repair, with fault isolation before any quote. If a unit is beyond economic repair, we say so.

Repair service

Maintenance contracts

In-service systems can be covered by a maintenance contract with remote support, on-site dispatch and spare parts cover, scoped by response level.

Maintenance plans

Replacement and migration

Replacement paths are based on interface type, port count and software release. Where a smooth transition is possible, we do not propose a rip-and-replace.

Current models
FAQ

Common questions about this model

Q: Can I still buy the E159? A: New units are no longer supplied. Spare parts, refurbished units and functionally compatible substitutes may still be available; we check stock against the part number and give you a definite answer. Note also that most replacement models named in an end-of-sale notice have themselves been discontinued, so confirm the current position with us before changing model.

Q: Can the B179 be powered from an ordinary PoE switch? A: Yes, as long as the switch provides standard 802.3af. The B179 has no local power inlet, so a room without PoE needs a single-port injector first, otherwise it will not power up.,Q: Can the B179 be powered from an ordinary PoE switch? A: Yes, as long as the switch provides standard 802.3af. The B179 has no local power inlet, so a room without PoE needs a single-port injector first, otherwise it will not power up.

Q: How do I find out whether spare parts still exist for my model? A: Send us the model name or part number (phone 400-678-9559, email gq.han@china-netel.com). We check stock and cross-reference alternatives first, then come back with a plan and a quote.

The model is end-of-sale, the problem is still ours to solve

Tell us the model, the part number and what the system is doing. We will tell you whether parts, repair or migration makes more sense before we talk price.

Contact Us
Call Us