China Netel logoChina Netel
AVAYA END-OF-SALE MODEL

Avaya SCOPIA XT4200 video endpoint

SCOPIA XT4200 (All-in-one room video endpoint) is end-of-sale. We still handle spare parts, repair, maintenance contracts and replacement for it, checked against the model and part number.

Model
SCOPIA XT4200
Part number
—
Series
Video Endpoints · SCOPIA XT / A175
Product status
End-of-Sale (discontinued)

Model and part number

SCOPIA XT4200 (All-in-one room video endpoint) belongs to Video Endpoints · SCOPIA XT / A175 and is a discrete orderable item within the Avaya portfolio. No part number is recorded for this model in our current data; we can trace it from the model name.

The same model can carry more than one part number (P/N), depending on year of manufacture, configuration or regional packaging. Please quote the part number when asking about spares or pricing; if you only have the model name, we can look the part number up for you.

ModelPart numberSeriesProduct status
SCOPIA XT4200—Video Endpoints · SCOPIA XT / A175End-of-Sale (discontinued)

Where these systems stand today

SCOPIA is the video conferencing line Avaya acquired with Radvision. The XT Series comprises the all-in-one room endpoints, PathFinder handled firewall traversal, and the A175 is an earlier desktop video device. What remains in China is concentrated in meeting rooms built around 2013, many of which have been running for more than a decade.

A video endpoint going end-of-sale is more final than a desk phone: endpoint, gatekeeper, MCU and firmware release form one coupled set, so when any part is withdrawn the upgrade path for the whole set is cut. On top of that, the XT Series camera and microphone array use proprietary interfaces with no generic substitute, so a single failure often takes an entire meeting room out of service.

Replacement and migration advice

The SCOPIA line as a whole has been withdrawn, and the replacement models named in the notices are no longer in production either. A meeting room has to be re-planned along one of three lines today: a current Avaya collaboration endpoint, a third-party video endpoint paired with the voice platform we supply, or a soft client driving room audio and video equipment. The three differ widely in cost, day-to-day operation and how well they merge with the existing telephone system, so the assessment should cover the estate rather than a single room.

SUPPORT

Four things we still handle after end-of-sale

End-of-sale does not mean the end of support. These are the four things we actually do for discontinued models, and the four questions customers ask most often.

Spare parts

We check original and refurbished stock against the part number, starting with consumables such as power supplies, handset cords, fans and boards.

Ask about parts

Repair and RMA

Board-level and unit-level repair, with fault isolation before any quote. If a unit is beyond economic repair, we say so.

Repair service

Maintenance contracts

In-service systems can be covered by a maintenance contract with remote support, on-site dispatch and spare parts cover, scoped by response level.

Maintenance plans

Replacement and migration

Replacement paths are based on interface type, port count and software release. Where a smooth transition is possible, we do not propose a rip-and-replace.

Current models
FAQ

Common questions about this model

Q: Can I still buy the SCOPIA XT4200? A: New units are no longer supplied. Spare parts, refurbished units and functionally compatible substitutes may still be available; we check stock against the part number and give you a definite answer. Note also that most replacement models named in an end-of-sale notice have themselves been discontinued, so confirm the current position with us before changing model.

Q: Can I replace just the failed XT endpoint? A: It depends on the MCU and gatekeeper release. A spare at the same firmware level can be swapped in on its own, but if the gatekeeper has since been upgraded the replacement may fail to register, so check versions first.,Q: Can I replace just the failed XT endpoint? A: It depends on the MCU and gatekeeper release. A spare at the same firmware level can be swapped in on its own, but if the gatekeeper has since been upgraded the replacement may fail to register, so check versions first.

Q: How do I find out whether spare parts still exist for my model? A: Send us the model name or part number (phone 400-678-9559, email gq.han@china-netel.com). We check stock and cross-reference alternatives first, then come back with a plan and a quote.

The model is end-of-sale, the problem is still ours to solve

Tell us the model, the part number and what the system is doing. We will tell you whether parts, repair or migration makes more sense before we talk price.

Contact Us
Call Us