China Netel logoChina Netel
AVAYA END-OF-SALE MODEL

Avaya TN744E communication manager board

TN744E (Call classifier board) is end-of-sale. We still handle spare parts, repair, maintenance contracts and replacement for it, checked against the model and part number.

Model
TN744E
Part number
700394638
Series
Aura Communication Manager Boards (TN Series)
Product status
End-of-Sale (discontinued)

Model and part number

TN744E (Call classifier board) belongs to Aura Communication Manager Boards (TN Series) and is a discrete orderable item within the Avaya portfolio. The sections below cover its current status, the support routes still available, and what else in the same series is worth knowing.

The part number for this model in the Avaya catalogue is 700394638. Purchasing, repair and maintenance are all quoted against this number.

The same model can carry more than one part number (P/N), depending on year of manufacture, configuration or regional packaging. Please quote the part number when asking about spares or pricing; if you only have the model name, we can look the part number up for you.

ModelPart numberSeriesProduct status
TN744E700394638Aura Communication Manager Boards (TN Series)End-of-Sale (discontinued)

Where these systems stand today

The TN range covers the port and resource boards inside Definity and Communication Manager cabinets: analogue and digital station boards, E1/T1 trunk boards, announcement boards, IP resource boards, and the IPSI and C-LAN control boards. Between them they decide whether a cabinet comes up at all and how many extensions and trunks it can carry.

In China the cabinet architecture is concentrated in foreign-invested headquarters, hotels and hospitals, where the mix of interface types cannot be changed lightly. With TN boards end-of-sale, replacing a whole cabinet costs far more than a board, so sites generally keep spares for the control boards and repair port boards as needed.

Replacement and migration advice

The long-term direction is to move ports off the TDM cabinet into an all-IP architecture, with Session Manager and System Manager handling routing and user management. In the short term, keeping one cold spare of each control board is what maintains cabinet availability. The migration window usually follows a data-centre refresh or a lease expiry.

SUPPORT

Four things we still handle after end-of-sale

End-of-sale does not mean the end of support. These are the four things we actually do for discontinued models, and the four questions customers ask most often.

Spare parts

We check original and refurbished stock against the part number, starting with consumables such as power supplies, handset cords, fans and boards.

Ask about parts

Repair and RMA

Board-level and unit-level repair, with fault isolation before any quote. If a unit is beyond economic repair, we say so.

Repair service

Maintenance contracts

In-service systems can be covered by a maintenance contract with remote support, on-site dispatch and spare parts cover, scoped by response level.

Maintenance plans

Replacement and migration

Replacement paths are based on interface type, port count and software release. Where a smooth transition is possible, we do not propose a rip-and-replace.

Current models
FAQ

Common questions about this model

Q: Can I still buy the TN744E? A: New units are no longer supplied. Spare parts, refurbished units and functionally compatible substitutes may still be available; we check stock against the part number and give you a definite answer. Note also that most replacement models named in an end-of-sale notice have themselves been discontinued, so confirm the current position with us before changing model.

Q: Does a failed IPSI have to be replaced with the same model? A: Essentially yes. The IPSI carries the signalling path between the cabinet and the server, and there is no generic substitute, so the replacement has to be the same model and firmware level. That is exactly why we suggest keeping one in stock rather than sourcing after a failure.

Q: How do I find out whether spare parts still exist for my model? A: Send us the model name or part number (phone 400-678-9559, email gq.han@china-netel.com). We check stock and cross-reference alternatives first, then come back with a plan and a quote.

The model is end-of-sale, the problem is still ours to solve

Tell us the model, the part number and what the system is doing. We will tell you whether parts, repair or migration makes more sense before we talk price.

Contact Us
Call Us