China Netel logoChina Netel
Product overviews

Netel IP broadcasting solution: networked intelligent broadcasting system

A SIP audio and video intercom developed specifically for industry users, with media streams carried over standard IP/RTP/RTSP protocols. It inherits the stability and carrier-grade sound quality of the vendor's phones and is fully compatible with all mainstream SIP-based IPPBX, softswitch and IMS platforms such as Asterisk, Broadsoft, 3CX and Elastix.

Product details - intercom and broadcast gateway

Product overviews

A SIP audio and video intercom developed specifically for industry requirements, with media stream transport over standard IP/RTP/RTSP protocols. It inherits the stability and carrier-grade audio quality of our telephones and interoperates fully with all mainstream SIP-based IPPBX, softswitch and IMS platforms such as Asterisk, Broadsoft, 3CX and Elastix. It combines many functional interfaces in one device: intercom, broadcasting, video, security, recording and audio capture, adapting to many environments for fast deployment. Highlights: compact enough to be embedded inside other equipment; emergency call button interface for one-touch calling; works with IPC cameras for video intercom; NVR recording of the camera with a standard RJ45 interface; recording output on a standard 3.5 mm jack, plug-and-play; 10 W-30 W mono amplifier output adapting to the input voltage; online system management and upgrade. Audio: narrowband codecs G.711a/u, G.723.1, G.726-32K, G.729AB; wideband codec G.722; half-duplex echo cancellation; DTMF in-band plus out-of-band DTMF relay (RFC2833) and SIP INFO. Physical: 2 RJ45 ports - yellow WAN 10/100M auto-negotiating with PoE support (802.3af, Class 3, 6.49-12.95 W) and black LAN (for the supplied camera only); Cat5 or better cable; 1 blue indicator (SIP and network status); 2 volume keys; 1 factory reset key; 1 recording output jack (3.5 mm standard audio, 15 Ohm impedance); 1 grounding screw; 1 passive speaker output (4 Ohm, POE/10 W, 12 V/10 W, 18 V/20 W, 24 V/30 W depending on supply voltage); 1 DSS key interface (4-wire, indicator output 5.0 V 5 mA, 4-pin pluggable terminal block); 1 microphone input (electret condenser recommended, -38 dB sensitivity, 2.2 kOhm impedance, 2.2 V bias, 2-pin pluggable terminal block); 1 short-circuit input/output interface with built-in relay (MAX DC30V/1A, AC125V/0.5A, 4-pin pluggable terminal block); 2 parallel power input interfaces (12V-24V/2A DC, one 5.5 mm DC jack and one 2-pin pluggable terminal block); standby power DC12V 1.32 W / PoE 1.78 W; aluminium alloy housing; indoor installation; operating temperature -30 to 70 C; storage temperature -40 to 70 C; relative humidity 10%-95%; device size 113x83x28 mm; package size 138x108x77 mm; device weight 250 g

Need selection advice or a maintenance replacement plan?

Tell us your current system release and agent headcount, and we will help verify models, expansion and replacement paths.

Contact Us
Call Us