
Product overview
The Avaya G450 Media Gateway (Branch Gateway) is a modular voice gateway for enterprise branches. Working with Communication Manager over H.248, it gives branches access to analogue, digital (DCP), BRI and T1/E1 endpoints plus IP phones and soft clients, with local survivability.
Hardware architecture
- 9-slot chassis: one motherboard slot plus eight media module slots (V1-V8), in four hardware versions G450 1.x / 2.x / 3.x / 4.x
- Hot-swappable motherboard modules, media modules, external Compact Flash and fan tray
- Dual load-sharing hot-swappable power supplies (the G450 supports DC power from Release 10.3)
- Up to 320 VoIP DSP channels; Memory SIMMs (G450 v1/v2/v3)
Voice and trunking capabilities
- Voice line interfaces: IP telephones, analog telephones, Avaya DCP telephones, BRI telephones, FXS/fax
- Voice trunk interfaces: FXO, BRI, T1/E1
- Supports VoIP and fax/modem over IP
- Codecs: G.711 A/mu-Law, G.729a, G.726 and Opus
- H.248 gateway protocol for connection to Communication Manager
Disaster recovery and local survivability
- Local Survivable Processor (LSP, with an S8300 server) and Standard Local Survivability (SLS, IPv4 only)
- Emergency Transfer Relay (ETR), modem dial backup
- Dynamic Call Admission Control (Dynamic CAC) for Fast Ethernet, serial and GRE tunnel interfaces
- Inter-Gateway Alternate Routing (IGAR), DHCP/TFTP server (IPv4 only), and alarm tone and contact closure support
Routing and networking
- Two WAN 10/100 Ethernet ports with traffic shaping; v1/v2/v3 also provide T1/E1 and USP interfaces
- Routing protocols: static, OSPF and RIP; supports ECMP equal-cost multipath, VRRP (IPv4), policy-based routing, GRE tunnels and dynamic IP
- IPSec VPN, CRTP, WAN QoS, DHCP relay, object tracking and backup interfaces
- LAN: two 10/100/1000 RJ-45 ports without POE, auto-negotiation, 4K MAC table, 64 VLANs, 802.1Q, ingress VLAN security, broadcast/multicast storm control, rapid spanning tree (RSTP), port mirroring, RMON and port redundancy
Security and management
- Media and signalling encryption, hardened management, digitally signed gateway firmware, managed security services and access control lists (ACL)
- Management: Avaya Device Manager, RADIUS authentication (IPv4), SNMPv1/v3, Telnet (IPv4)/SSHv2, SCP/TFTP/FTP/HTTP/HTTPS and Syslog client
- Packet sniffing, RTP-MIB, and backup and restore via USB flash drive
- New in Release 10.3: SHA-2 SSH key exchange and host keys, Enhanced Access Security Gateway (EASG), 16-digit dial plans, login password complexity, Syslog over TLS, TLS 1.3 and Edge Gateway mode
Media modules and the S8300 server
- Up to 8 voice media modules: MM711 (8 universal analog ports), MM714 (4 analog telephones + 4 analog trunks), MM714B (with ETR), MM716 (24 analog), MM712 (8 DCP), MM717 (24 DCP), MM710/MM710B (1 T1/E1 PRI), MM720/MM721 (8 BRI), MM722 (2 BRI)
- Up to 3 WAN media modules: MM340 (E1/T1 data WAN) and MM342 (universal serial data WAN); G450 v4 does not support the MM340/MM342
- Slot V1 can host one S8300 server; the S8300E uses a dual-core Intel Ivy Bridge processor with 320 GB/500 GB/1 TB HDD and 500 GB SSD options
Supplementary official documentation (Branch Gateway R10.3)
The following material is compiled from Avaya official overviews and specification documents to supplement version, component relationship and deployment details; refer to the original documents for definitive capacity and compatibility matrices.
- The R10.3 (2026-09) document is the overview and specification for the G450 Branch Gateway.
- The document covers hardware specifications, minimum firmware requirements, branch gateway features, physical description and supported media modules.
- Page 17 gives the physical description of the G450 and a view of the front panel interfaces.
- Page 20 lists the new features and the function matrix for R10.3.
Document source and download
The official document referenced here is Avaya G450 Branch Gateway Overview and Specification R10.3 (2026-09); the original PDF can be obtained under Product Literature in this site's Downloads section.

