
The two-layer card structure
The IP Office 500 V2 control unit has four built-in base card slots. Cards come in two layers: base cards plug directly into control unit slots and carry their own front panel and ports; trunk daughter cards are fitted onto base cards and use the base card's front panel ports to connect trunk lines. Understanding these two layers keeps the configuration list correct.
Base card
| Base card | Maximum | Ports and description |
|---|---|---|
| Digital extension card DS8 | 3 | Ports 1-8 connect digital extensions, 9-12 can connect trunks; the IP500 V2A control unit does not support this card |
| Digital extension card DS8A | 4 | Ports 1-8 connect digital extensions, 9-12 can connect trunks |
| Analog telephone card (2-port) | 4 | Provides 2 analog extension ports, and a trunk daughter card can share ports 9-12 |
| Analog telephone card (8-port) | 4 | Provides 8 analog extension ports, and a trunk daughter card can share ports 9-12 |
| Voice compression card VCM | 2 | No extension ports, only a trunk daughter card position; provides up to 128 voice compression channels depending on the code (overall control unit limit 148 channels, including compression resources on combination cards) |
| Combination card ATM (analog trunk) | 2 | Ports 1-6 digital extensions, 7-8 analog telephones, 9-10 four analog trunks; 10 voice compression channels supporting G.711 / G.722 / G.729a / G.723 with 64 ms echo cancellation |
| Combination card BRI | 2 | Ports 1-6 digital extensions, 7-8 analog telephones, 9-10 two BRI trunks (4 B channels); 10 voice compression channels with the same codecs |
| Unified communications module UCM V2 | 1 | Requires a Preferred Edition license; supports more than 200 users when running only Voicemail Pro; up to 200 users and 50 concurrent sessions when Voicemail Pro and one-X Portal run together; does not occupy a trunk card slot |
Trunk daughter card
Trunk daughter cards are fitted onto base cards and use the ports already present on the base card to connect trunk lines. Mounting posts and port identification labels are supplied with the card; match the lines to the labels during installation.
| Trunk daughter card | Maximum | Description |
|---|---|---|
| Analog trunk card (V2) | 4 | 4 analog loop-start trunks; built-in V.32 modem for remote access; provides one power-fail transfer path (telephone to trunk) on an 8-port analog telephone card; cannot be used together with a VCM card |
| Universal PRI card (PRI-U) | 4 | Up to 2 PRI trunks, in single-port and dual-port versions; configurable as E1 PRI, T1 robbed bit, T1 PRI or E1R2; 8 channels are enabled by default per interface and can be expanded with 2-channel or 8-channel licenses; up to 24 T1 or 30 E1 channels on a single port and 48 or 60 on a dual port; built-in CSU/DSU with loopback testing and shared T1 voice and data, with service status indicators and physical test points |
| BRI trunk card (European ISDN) | 4 | Up to 4 BRI trunks, each 2B+D; available in 2-port (4-channel) and 4-port (8-channel) versions |
Four points to watch when configuring
- Power-fail transfer: pairing an 8-port analog telephone card with an analog trunk card reserves one trunk per extension, so calls can still go out during a mains failure; the 2-port analog telephone card does not offer this capability.
- Slot order: when the number of cards of a given type exceeds capacity, the card in the rightmost slot is disabled, so plan to place high-density cards on the left.
- Compression resources: IP trunks and IP telephones depend on voice compression channels. Compression resources on VCM cards and the two combination cards can be added together, but the overall control unit limit is 148 channels.
- Function modules: when one-X Portal or voicemail is needed, a UCM V2 occupies one slot. It does not use a trunk card allocation but does require a Preferred Edition license.
Supplementary official documentation (IP Office R12.3)
The following material is compiled from Avaya official overviews and specification documents to supplement version, component relationship and deployment details; refer to the original documents for definitive capacity and compatibility matrices.
- The application services architecture diagram in the R12.3 document shows the relationship between the control unit, the expansion system and application services.
- On-board cards and expansion modules are configured in IP Office Manager; the official documentation includes example configuration screens.
- Application licenses are described from page 80 of the document, and server specifications on page 123.
Document source and download
The official document referenced here is Avaya IP Office Platform Solution Description R12.3 (2026-04); the original PDF can be obtained under Product Literature in this site's Downloads section.

